Injection moulding, TFC, coating and assembly of your plastic housings and technical components

An alternative to Reaction Injection Moulding (RIM)

Reaction Injection Moulding as a technique for making housing components has been around for a long time. A good alternative can be found in thermoplastic foam casting (TFC), otherwise known as Structural Foam Moulding (SFM). Both have advantages and disadvantages. But when should you choose which technique?

When should you choose RIM?

RIM is an ideal technique when annual volumes are very low and product accuracy is less important. It should be noted that RIM product dimensional accuracy can be further improved in the finishing process (e.g. milling, drilling and sanding). RIM is obviously ideal when expected sales are uncertain and (mould) investments must be kept to a minimum.

Various thermo-hardened plastics, or so-called thermoset plastics, can be processed with RIM, the best known of which is polyurethane. However, these plastics cannot be remelted for reshaping into other products.

And when should you choose thermoplastic foam casting (TFC)?

Thermoplastic foam casting is a proven technique that has been used by many injection-moulding companies around the world for a long time. It is ideal for small to very large components in small to medium annual volumes. TFC components can be made from an enormous variety of plastics and high levels of accuracy can be achieved. These plastics can always be recycled and reused to produce new products.

TFC components can be given various fine and coarse surface textures and subjected to heavy mechanical loads if made with the right plastics.

TFC requires an investment in TFC moulds that is generally somewhat higher than that for RIM. On the other hand, a TFC product can be used or painted almost immediately. Removing webbing and filling air pockets on its surfaces is not necessary.

So when should you use RIM and when should you use TFC?

Reaction Injection Moulding is ideal for:

  • Small production batches (ranging from 1 to 100 units per year)
  • Prototyping
  • Uncertainty about expected annual volumes (investment is lower)
  • Products that must be made quickly

Conversely, TFC is ideal for:

  • Larger production batches (from as few as 50 units to as many as 10,000 units)
  • Products with a low unit price (it will still be cheaper than RIM in the long term even after having invested in a mould)
  • Components requiring higher dimensional accuracy
  • A multitude of plastics can be used
  • End-of-life recyclability

Comparison of RIM and TFC

Material

Thermo-hardened plastic

 

Density 1.07 – 1.40

Thermoplastic (with many options) with foaming agent

Density from 0.88

Environment

Recyclability not possible

Good recyclability

Material properties impacted by

Material supplier

Material supplier and manufacturer

Resistance to creeping

-

+

Inserts

Special types

  • Overmoulding

Standard types

  • Screwing
  • Overmoulding
  • Melting
  • Ultrasonic

Tolerances

DIN 16742-TG 4/5

DIN 16742-TG6/7 (more precise)

Finishing

Substantial finishing required

Little to no finishing required

Would you like to know more?

If you have any questions about materials, the injection moulding process or your specific product, feel free to contact us.

Contact us

Scroll to top